Advanced processing solutions for aerospace split blisks
The blisk is one of the key parts of aero-engines, and it is usually divided into two types: split type and integral type. The split type blisks are mostly connected with the blades…
2021-2-4 0:42:41
Diamond wheel for grinding magnetic materials
With the ferrite market is becoming full, the emerging market of NdFeB. The tooling requirements of advanced processes, such as internal grinding, cylindrical grinding, centerless g…
2021-2-3 7:38:03
Analysis of influence of PCD cutting edge strengthening on performance
Case"Edge Passivation Strengthening" applied in the high-speed surface milling for aluminum alloy1. Processing parameters:Work-piece
2021-2-3 2:02:33
Application of PCD tools in automobile piston machining
PCD refers to a polycrystal formed by mixing diamond micro-powder (with a particle size of micrometers) and a small amount of metal powder (such as Co) and then sintering at high te…
2021-2-2 8:40:40
How to grind copper?
Copper has good ductility, which is easy to cause porosity blockage, so that the grinding wheel loses heat dissipation ability.Then cause the workpiece burn or expansion deformation…
2021-2-2 7:45:18
Mono crystal Diamond cutting tool
The Radius could reach R0.002Overall waviness: 0.014μmSurface quality could meet: 1nmThe included angle: 15 degree is OK
2021-1-29 0:27:51
Diamond Pellets
Diamond pellets are mainly used for grinding optical glass, and also for finish grinding of lens, ceramics, crystal and other optical elements.Metal bond diamond finish pelletsMetal…
2021-1-27 0:46:58
Processing Solution for PCD Tools
Vitrified diamond for PCD & PCBN tools Model 6A2, 11V9 can be used to grinding PCD cutting tools, PCBN cutting tools, CVD tools, MCD tools, milling cutter, reamer, drill and regrin…
2021-1-26 8:12:23
PCD cutting tool grinding problems and solutions
What is PCD?Polycrystalline Diamond (PCD) is a new type of superhard material that has been researched and used internationally since the 1970s. It is formed by sintering at a high …
2021-1-24 0:37:20
Solve the problem of processing the cylinder head valve seat conduit hole
The design of the cylinder head is the key to reducing fuel emissions and meeting stringent government regulations. The valve seat hole of the valve guide on the cylinder head part …
2021-1-20 5:18:29
Causes of damage to PDC drill bits
Judging from the used PDC drill bits, the main characteristics of most PDC bit damage are the fracture of the tooth column, the fragmentation of the composite sheet, the chipping, e…
2021-1-19 5:23:22
Cutting performance of PCBN tools
Performance of PCBN tool materialAccording to its manufacturing process, PCBN is divided into CBN directly combined into a sintered block through high temperature and high pressure,…
2021-1-16 4:04:56
Polycrystalline Diamond Compact
Polycrystalline diamond (PCD) composite is a kind of composite material in which the thin layer of PCD is adhered to the cemented carbide substrate. It has high wear resistance of P…
2021-1-14 20:29:57
How to use CBN grinding wheel?
Most of the CBN grinding wheel substrate is made of metal, and when the CBN grinding wheel is grinding, most of the heat energy will be transmitted to the direction of the grinding …
2021-1-13 21:05:51
New energy vehicle motor shell processing program
The motor housing is an important component of the new energy vehicle motor drive system. It has the characteristics of high dimensional accuracy, strict surface quality requirement…
2021-1-12 21:58:09
Why is copper hard to grind ?
Copper has good ductility, it is easy to cause blockage of pores, and the grinding wheel loses heat dissipation capacity, which in turn causes burns or expansion and deformation of …
2021-1-12 20:32:47
Why is grinding more accurate than turning or milling？
The grinding mechanism is completely different with cutting.In cutting,using the tool cut into workpiece material so the material deforms then breaks.The surface of the workpiece is…
2021-1-12 2:31:20
Features and applications of PCD&PCBN tools
PCD (Polycrystalline Diamond) ToolPCD tools have the characteristics of high hardness, high compressive strength, good thermal conductivity and wear resistance, etc., which can obta…
2021-1-12 0:12:06
Application of Vitrified Diamond Wheel in Thermal Spraying Industry
New materials often have a domino effect on aerospace processing technology. Environmental issues have forced the material to change from traditional chrome plating to high-speed ox…
2021-1-9 20:20:03
The influence of raw materials on grinding wheel life
Diamond grinding wheel is generally composed of diamond abrasive layer, transition layer and matrix.The quality of diamond abrasives directly affects the quality of the grinding whe…
2021-1-8 23:50:21
Semiconductor Industry Solutions
PCD & PCBN Tools Grinding Industry
Diamond Cutting Bruting Polishing
Add: No.171 Zhongyuan Rd, Zhongyuan District, Zhengzhou, 450001, Henan, China
Tel: +86-371-86545906
Phone / Whats App: +86 18339903057
E-mail: [email protected]
