The function of honing cylinder holes.
Coarse honing, it is also the first step of honing the cylinder hole. It is mainly used to remove the allowance, eliminate the tool mark in fine boring process, form cylindrical hol…
2021-3-9 10:12:17
Machining PCD/PCBN tools with vitrified bonded diamond grinding wheel
Machining PCD/PCBN tools with vitrified bonded diamond grinding wheel Polycrystalline diamond (PCD) material, polycrystalline cubic boron nitride (PCBN) material, diamond or CBN mic…
2021-3-8 15:02:53
How to do mirror finish grinding by a grinder
1. What is mirror finish grinding?
2021-3-8 14:44:35
How to dressing a diamond grinding wheel?
How to clean a diamond grinding wheel?All tools in our life have a life span, grinding wheels are not an exception as well. Is there any way to repair them? Definitely YES!Please re…
2021-3-5 10:34:48
Factors affecting the service life of CBN toolsFactors affecting the service life of CBN to…
Factors affecting the service life of CBN toolsThe service life of the tool is directly related to the level of processing cost. A good machine tool also needs to be equipped with a…
2021-3-5 10:27:28
How to solve DDG Grinding Wheel problems?
How to solve DDG Grinding Wheel problems?1. During the grinding process, the CBN grinding wheel burns workpieceØ The hardness of the CBN wheel is on the high side, should repl…
2021-3-4 9:17:50
Analysis of the advantages of electroplating bond grinding wheel
Analysis of the advantages of electroplating bond grinding wheel 1. High HardnessElectroplated grinding wheels usually use electroplated nickel or nickel-cobalt alloy as binde…
2021-3-2 10:27:55
14 Important Parts of Centerless Grinder
1. Machine Tool (Machine bed)The base is a solid heavy cast iron structure that supports other parts of the machine. It contains the hydraulic oil tank and the grinding wheel hea…
2021-3-1 11:41:38
Integral PCD milling cutter-improve production efficiency
In the correct application, the service life of PCD tools is almost 20 times that of the same carbide tools. The new generation of integral PCD spiral end mills and drills will furt…
2021-2-8 11:41:50
PDC cutter for cobalt removal and non-cobalt removal
Polycrystalline diamond composite (PDC cutter) is a new type of composite material, which is formed by sintering diamond particles with micron size and tungsten carbide matrix under…
2021-2-7 9:08:39
Master these Re-grinding techniques to easily realize tool recycling
1. Tool wear has the following typesMechanical wear, binder wear, reverse transformation (phase change) wear, chemical wear, diffusion wear, adhesive wear, micro-cracking wear, and …
2021-2-6 10:03:36
Advanced processing solutions for aerospace split blisks
The blisk is one of the key parts of aero-engines, and it is usually divided into two types: split type and integral type. The split type blisks are mostly connected with the blades…
2021-2-4 0:42:41
Diamond wheel for grinding magnetic materials
With the ferrite market is becoming full, the emerging market of NdFeB. The tooling requirements of advanced processes, such as internal grinding, cylindrical grinding, centerless g…
2021-2-3 7:38:03
Analysis of influence of PCD cutting edge strengthening on performance
Case"Edge Passivation Strengthening" applied in the high-speed surface milling for aluminum alloy1. Processing parameters:Work-piece
2021-2-3 2:02:33
Application of PCD tools in automobile piston machining
PCD refers to a polycrystal formed by mixing diamond micro-powder (with a particle size of micrometers) and a small amount of metal powder (such as Co) and then sintering at high te…
2021-2-2 8:40:40
How to grind copper?
Copper has good ductility, which is easy to cause porosity blockage, so that the grinding wheel loses heat dissipation ability.Then cause the workpiece burn or expansion deformation…
2021-2-2 7:45:18
Mono crystal Diamond cutting tool
The Radius could reach R0.002Overall waviness: 0.014μmSurface quality could meet: 1nmThe included angle: 15 degree is OK
2021-1-29 0:27:51
Diamond Pellets
Diamond pellets are mainly used for grinding optical glass, and also for finish grinding of lens, ceramics, crystal and other optical elements.Metal bond diamond finish pelletsMetal…
2021-1-27 0:46:58
Processing Solution for PCD Tools
Vitrified diamond for PCD & PCBN tools Model 6A2, 11V9 can be used to grinding PCD cutting tools, PCBN cutting tools, CVD tools, MCD tools, milling cutter, reamer, drill and regrin…
2021-1-26 8:12:23
PCD cutting tool grinding problems and solutions
What is PCD?Polycrystalline Diamond (PCD) is a new type of superhard material that has been researched and used internationally since the 1970s. It is formed by sintering at a high …
2021-1-24 0:37:20
Semiconductor Industry Solutions
PCD & PCBN Tools Grinding Industry
Diamond Cutting Bruting Polishing
Add: No.171 Zhongyuan Rd, Zhongyuan District, Zhengzhou, 450001, Henan, China
Tel: +86-371-86545906
Phone / Whats App: +86 18339903057
E-mail: [email protected]
