Tooth surface grinding of carbide circular saw blade
Usually, the tooth surface is grinded straight, but sometimes it is grinded diagonally.
Concave grinding also belongs to tooth grinding. This machining is carried out at high rotational speeds using a grinding head. However, this method can not be applied to every circular saw blade. In order to be able to grind the tooth surface in peripheral grinding, there must be a certain chip removal groove. In particular, ensure that the grinding head is positioned precisely at the center of the saw blade thickness and cutting width.
Peripheral grinding method of concave grinding: generally use 1A1 diamond grinding mounted pins to grind tooth surface.
Carbide circular saw blade tooth top grinding
The grinding on the top of the tooth is more varied than the grinding on the tooth surface. The design of tooth geometry ranges from straight to nearly round - depending on the range of use of the carbide circular saw blade. The tooth top can be ground by face grinding or edge grinding.
The end face grinding method is especially time-saving. Using this method, the grinding wheel only needs to be rotated at a certain Angle in order to produce different tooth shapes (trapezoid, V, etc.).
Tooth side grinding of carbide circular saw blade
To prevent the blade from pressing into the material, sharpen the sides of the saw along the cut and feed directions. Therefore, the precision of serrations is very important to the surface quality. In the production of circular saw blade, face grinding method or peripheral grinding method is used for one-time grinding.
Moresuperhard can offer circular saw blade grinding solution, we can provide saw blade tooth side grinding,tooth face grinding,tooth tip grinding.
---EDITOR: Doris Hu
---POST: Doris Hu
Semiconductor Industry Solutions
PCD & PCBN Tools Grinding Industry
Diamond Cutting Bruting Polishing
Add: No.171 Zhongyuan Rd, Zhongyuan District, Zhengzhou, 450001, Henan, China
Tel: +86-371-86545906
Phone / Whats App: +86 18339903057
E-mail: [email protected]
